Baton + LHU

 

 BH-LHU-04 Double plastic swivelling holder for the lengths of expandable baton 16", 18" or 21" and for tactical police flashlights

 BH-LHU-05 Double plastic swivelling holder for the lengths of expandable baton 21", 23" or 26" and for tactical police flashlights

BH-LHU-04 - BH-LHU-05


BH-LHU-04 or BH-LHU-05: Double plastic swivelling holder consists of the holders BH-04 or BH-05 (for baton) and the holder LHU-04 (for flashlight) connected by special adaptor. Advantage of this solution consists in saving the space on the belt. Constant position of the baton and flashlight improves orientation on the belt when choosing the appropriate device. Both holders rotate in respect to the belt simultaneously, while their mutual position remains unchanged. The adaptor makes it possible to accommodate easily the holders for carrying on the right or left side. Fastening clip ensures its fast fixation on the belt with one hand only without necessity of unbuckling the belt. The holder can be rotated in respect to the belt by full circle of 360 degrees with 16 locking positions.

 

 BH-LHU-14 Double plastic swivelling holder for the lengths of expandable baton 16", 18" or 21" and for tactical police flashlights

 BH-LHU-15 Double plastic swivelling holder for the lengths of expandable baton 21", 23" or 26" and for tactical police flashlights

BH-LHU-14 - BH-LHU-15


BH-LHU-14 or BH-LHU-15: Double plastic swivelling holder consists of the holders BH-14 or BH-15 (for baton) and the holder LHU-14 (for flashlight) connected by special adaptor. Advantage of this solution consists in saving the space on the belt. Constant position of the baton and flashlight improves orientation on the belt when choosing the appropriate device. Both holders rotate in respect to the belt simultaneously, while their mutual position remains unchanged. The adaptor makes it possible to accommodate easily the holders for carrying on the right or left side.This type of holder uses model of flat quick-coupling clip, which enables its rapid insertion on belt with one hand only without unbuckling the belt. However, the distance between the belt and holster is smaller with this type of clip. The holder can be rotated in respect to the belt by full circle of 360 degrees with 16 locking positions. It can be fastened also to the supporting M.O.L.L.E. system.

 

 SH-21-LHU-04 Double plastic swivelling holder for the lengths of expandable baton 16", 18" or 21" and for tactical police flashlights

SH-21-LHU-04


SH-21-LHU-04: Double plastic swivelling holder consists of the holders SH-21 (for baton) and the holder LHU-04 (for flashlight) connected by special adaptor. Advantage of this solution consists in saving the space on the belt. Constant position of the baton and flashlight improves orientation on the belt when choosing the appropriate device. Both holders rotate in respect to the belt simultaneously, while their mutual position remains unchanged. The adaptor makes it possible to accommodate easily the holders for carrying on the right or left side. Fastening clip ensures its fast fixation on the belt with one hand only without necessity of unbuckling the belt. The holder can be rotated in respect to the belt by full circle of 360 degrees with 16 locking positions.

 

 SH-121-LHU-14 Double plastic swivelling holder for the lengths of expandable baton 16", 18" or 21" and for tactical police flashlights

SH-121-LHU-14


SH-121-LHU-14: Double plastic swivelling holder consists of the holders SH-121 (for baton) and the holder LHU-14 (for flashlight) connected by special adaptor. Advantage of this solution consists in saving the space on the belt. Constant position of the baton and flashlight improves orientation on the belt when choosing the appropriate device. Both holders rotate in respect to the belt simultaneously, while their mutual position remains unchanged. The adaptor makes it possible to accommodate easily the holders for carrying on the right or left side.This type of holder uses model of flat quick-coupling clip, which enables its rapid insertion on belt with one hand only without unbuckling the belt. However, the distance between the belt and holster is smaller with this type of clip. The holder can be rotated in respect to the belt by full circle of 360 degrees with 16 locking positions. It can be fastened also to the supporting M.O.L.L.E. system.

 

Baton + LH

 

 BH-LH-04 Double plastic swivelling holder for the lengths of expandable baton 16", 18" or 21" and for tactical police flashlights

 BH-LH-05 Double plastic swivelling holder for the lengths of expandable baton 21", 23" or 26" and for tactical police flashlights

BH-LH-04 - BH-LH-05


BH-LH-04 or BH-LH-05: Double plastic swivelling holder consists of the holders BH-04 or BH-05 (for baton) and the holder LH-04 (for flashlight) connected by special adaptor. Advantage of this solution consists in saving the space on the belt. Constant position of the baton and flashlight improves orientation on the belt when choosing the appropriate device. Both holders rotate in respect to the belt simultaneously, while their mutual position remains unchanged. The adaptor makes it possible to accommodate easily the holders for carrying on the right or left side. Fastening clip ensures its fast fixation on the belt with one hand only without necessity of unbuckling the belt.  The holder can be rotated in respect to the belt by full circle of 360 degrees with 16 locking positions.

 

 BH-LH-14 Double plastic swivelling holder for the lengths of expandable baton 16", 18" or 21" and for tactical police flashlights

 BH-LH-15 Double plastic swivelling holder for the lengths of expandable baton 21", 23" or 26" and for tactical police flashlights

BH-LH-14 - BH-LH-15


BH-LH-14 or BH-LH-15: Double plastic swivelling holder consists of the holders BH-14 or BH-15 (for baton) and the holder LH-14 (for flashlight) connected by special adaptor. Advantage of this solution consists in saving the space on the belt. Constant position of the baton and flashlight improves orientation on the belt when choosing the appropriate device. Both holders rotate in respect to the belt simultaneously, while their mutual position remains unchanged. The adaptor makes it possible to accommodate easily the holders for carrying on the right or left side.This type of holder uses model of flat quick-coupling clip, which enables its rapid insertion on belt with one hand only without unbuckling the belt. However, the distance between the belt and holster is smaller with this type of clip. The holder can be rotated in respect to the belt by full circle of 360 degrees with 16 locking positions. It can be fastened also to the supporting M.O.L.L.E. system.

 

 SH-21-LH-04 Double plastic swivelling holder for the lengths of expandable baton 16", 18" or 21" and for tactical police flashlights

SH-21-LH-04


SH-21-LH-04: Double plastic swivelling holder consists of the holders SH-21 (for baton) and the holder LH-04 (for flashlight) connected by special adaptor. Advantage of this solution consists in saving the space on the belt. Constant position of the baton and flashlight improves orientation on the belt when choosing the appropriate device. Both holders rotate in respect to the belt simultaneously, while their mutual position remains unchanged. The adaptor makes it possible to accommodate easily the holders for carrying on the right or left side. Fastening clip ensures its fast fixation on the belt with one hand only without necessity of unbuckling the belt. The holder can be rotated in respect to the belt by full circle of 360 degrees with 16 locking positions.

 

 SH-121-LH-14 Double plastic swivelling holder for the lengths of expandable baton 16", 18" or 21" and for tactical police flashlights

SH-121-LH-14


SH-121-LH-14: Double plastic swivelling holder consists of the holders SH-121 (for baton) and the holder LH-14 (for flashlight) connected by special adaptor. Advantage of this solution consists in saving the space on the belt. Constant position of the baton and flashlight improves orientation on the belt when choosing the appropriate device. Both holders rotate in respect to the belt simultaneously, while their mutual position remains unchanged. The adaptor makes it possible to accommodate easily the holders for carrying on the right or left side.This type of holder uses model of flat quick-coupling clip, which enables its rapid insertion on belt with one hand only without unbuckling the belt. However, the distance between the belt and holster is smaller with this type of clip. The holder can be rotated in respect to the belt by full circle of 360 degrees with 16 locking positions. It can be fastened also to the supporting M.O.L.L.E. system.

Logo of Euro Security Products

 Address Hyacintová 20, CZ 106 00  Prague 10, Czech Republic 
   
Telephone

+420 777 720 816  |  +420 774 720 803

   
E-mail


 

Facebook YouTube Instagram

All rights reserved. © EURO SECURITY PRODUCTS s.r.o. (Ltd.), 1992 – 2024