BL-01 or BL-02 Additional flashlight for the telescopic baton
It is possible to deliver as an option to the telescopic baton an additional flashlight of the type BL – 01 or BL – 02. It can be used as independent flashlight.
- High luminous intensity thanks to 3 LED diodes
- Locking of end position (ON -OFF)
- Duration of lighting up to 250 hours for the type BL-01, up to 80 hours for the type BL-02
- Power supply:
6 pcs of lithium battery of the type CR 2032 for the type BL-01, 2 pcs for the type BL-02 - Service life of LED diodes is 100 000 hours
- Waterproof duralumin body
- Frontal glass made of polycarbonate
 |
 |
||||
|
|||||
BNS-01 or BNS-02 Night police set for Expandable Baton
Flashlight BL-01 or BL-02 makes it possible to create so called “Night police set for Baton” consisting of plastic red signal cone, BL-01 or BL-02 flashlight and nylon pouch with flexible metallic clip for fastening on a belt. It can be alternatively fastened also to the supporting M.O.L.L.E. system. The main advantage of this solution is in the fact that the signal cone does not take any extra space in the pouch as the flashlight is inserted into it. At the same time it strengthens the pouch and increases thus protection of the flashlight. The cone is open at its top, which enables normal use of the flashlight for lighting with white light without necessity of removing the cone (checking of documents, checking of interior of vehicle, etc.). Excellent tool, not only for traffic police.
BNS-01 Night police set for Expandable Baton
BNS-02 Night police set for Expandable Baton
M-2 or M-3 Additional tactical mirror for the telescopic baton
Telescopic batons can be fitted with additional tactical mirrors of two sizes. These mirrors will enable you for example to determine presence of an aggressor behind the corner or in the room to be entered, The mirror is equipped with a clip for easy fitting on the baton.
Diameters of reflective surface:
Type M-2: diameter 71 mm (2 3/4”)
Type M-3: diameter 92 mm (3 2/3”)
Nylon holder for the Tactical mirror M-2 or M-3
Nylon holder - which can be supplied as an option, protects the mirror against damage and enables its wearing on the belt. Holder is equipped with strong metallic clip, which enables its fast fixation on a belt (without unbuckling it) or to a tactical vest. It can be alternatively fastened also to the supporting M.O.L.L.E. system.
 |
 |
 |
The variants M - 2 - 18 and M - 3 - 18 have been designed
for use on the batons with tube diameter 18 mm, e.g. Bonowi EKA - Einsatzstock.
 |
 |
 |
BE-01 Supplementary Expandable Baton´s conical rubber ending with a jut
It is also possible to supply a special large ending on the handle for expandable batons to to increase greatly the certitude of baton holding.. This ending has a specially curved jut, which allows hitting the adversary with the other side of baton. This is advantageous in situations where a confined space makes it impossible to fully open the baton and use it. The ending is supplied separately or on request for a complete baton.
 |
 |
BE-02 Supplementary Expandable Baton’s HARDENED steel ending
It is also possible to supply a special steel hardened ending of the handle for expandable batons, which makes it possible to use it as an impact tool, e.g. for breaking of windows or as an improvised hammer.
BE-03 Expandable baton ending with crowbar
“Openers” by ESP – more detailed information >
Baton ending in the form of small crowbar is designated particularly for use by police and rescue teams. It can be easily mounted on the baton after unscrewing its original ending. In this manner it is possible to create in emergency situations very rapidly an alternate tool namely for levering of locks and hasps. Its rear part is used as hammer.
Dimensions: 80x28mm, weight 215g.
BE-04 | Supplementary rubber ending with special hard spike
This baton ending with special hard spike can replace the original ending supplied on the ESP batons. It serves particularly in emergency cases for destruction of obstacles made of glass, for example at car accidents or police interventions. The ending is designated namely for armed forces and rescue units, but also for ordinary driver as an emergency tool for escape from the vehicle in case of accident. Hard spike, which is covered with protective rubber cover, reliably breaks the glass surface. The extended rubber part of the ending improves grasp of the baton, prevents slipping of the hand and protects it partly against possible injury by cullet.
BWB-01 Special impact extension – Baton window breaker
 |
|---|
| manner of mounting |
Mounting of this ending on the baton is very quick and easy. It is determined for forcible entries into objects and vehicles during police and rescue operations. The head is made of high quality hardened steel and it is equipped with a plastic fixing centre. As an option it is possible to purchase also a special pouch with metallic clip BBH-01.
Dimensions: diameter 48 x 56 mm, weight 235 g.
Comparison of Expandable batons ESP and ASP with Baton window breaker (found on YouTube)
Special impact extension – Baton window breaker – more detailed information >
BBH-01 Nylon holder for special impact ending BWB-01
Nylon holder suitable for special impact ending for expandable baton has a velcro seal. Holder is equipped with strong metallic clip, which enables its fast fixation on a belt (without unbuckling it) or to a tactical vest. It can be alternatively fastened also to the supporting M.O.L.L.E.
BCB-01 Crowbar for Expandable baton
The crowbar is designated for use by police or rescue teams. It can be easily mounted on the baton after unscrewing its original ending. In this manner it is possible to create in emergency situations very rapidly an alternate tool for forced entry into the object, for levering of hinges and locks, removal of nails, hammering or for rescuing of persons from vehicles. Version for armed services is equipped moreover with side protrusions, which serves for breaking of inserts of ordinary locks.
Dimensions: 170x48mm, weight 850g.
BCH-01 Holder for the crowbar BCB-01
This special nylon holder serves for storage of the crowbar for the baton BCB-01. Top tiltable flap equipped with fixing Velcro straps protects the user from the sharp edge of the crowbar during transport. Rear part of the holder is equipped with reinforced straps and it is accommodated for placing the whole set both on service belt, or on tactical vest equipped with the M.O.L.L.E system.
BA-01 Axe for Expandable baton
Rescue axe is a tool designated particularly for use by police or rescue teams. It can be easily mounted on the baton after unscrewing its original ending. In this manner it is possible to create in emergency situations very rapidly an alternate multi-function tool – it can be used for chopping, hammering, levering, etc. It can also be used for rescuing of persons from vehicles or for removal of fallen branches, etc.
Dimensions: 115x80mm, weight 560g.
BS-01 Shovel for expandable baton
It can be easily mounted on the baton after unscrewing its original ending. In this manner it is possible to create in emergency situations very rapidly an alternate tool increasing the possibilities of using ESP expandable baton. This shovel was created for Army and Police Forces, rescue teams, but also for anybody who could need sometimes to free off a stuck car or in camping... Body of the hand shovel is made of hardened steel, edges of the shovel are sharpened and cutting. The shovel can be mounted on the baton in two blocked positions. Fully opened, in can be used like normal shovel, spade or axe for cuting wood or to clear in forest. When blocked at right angle, in can be used as a pickaxe.
Dimensions: 230 x 150 mm, weight 720 g.
 |
 |
BCT-01 Cutter for expandable baton
Cutter for expandable baton represent comparatively compact accessory, which can be easily placed also on service vest. When combined with two expandable batons, which are now more and more frequently available even in ordinary two-member patrol, it creates very quickly a fully operational cutter, which would be otherwise too heavy and encumbering to be taken to action. It serves as worthful aid at many interventions, military or res cue actions. It can help for example to make a passage through high fence or to overcome an obstacle made of barbed wire. The maximum diameter of (non-hardened) wire it can is 6 mm. Mass without batons is 640 g, length 185 mm.
AH-01 | Multi-functional handle for baton’s accessories
This multi-functional handle makes it possible to use numerous accessories to expandable baton in the case you don’t have the expandable moment or you cannot use it for various reasons. The handle has the same thread at both ends, which enables mounting of the whole series of accessories, such as additional flashlights BL-01 and BL-02, shovel BS-01, crowbar BCB-01, hammer BE-03, ending with special hard spike BE-04 or axe BA-01. It can be used also as the second handle for the wire-cutters BCT-01. Combination of this handle with various accessories makes it possible to create very easily and quickly a whole range of tools suitable for example for motorists or rescue teams.
Additional hand strap for the telescopic baton - Type ExB
We can supply to telescopic batons (type ExB) also additional hand strap. The strap can be easily inserted under the screw-on ending. The baton can be thus used with or without the hand strap - as needed.